Please Note: All large burners are touch activated unless otherwise specified.
- Simply unbox.
- Plug in with the socket switched off.
- Remove you wax melt from it’s packaging
- Place your wax melt onto the hot plate (please ensure this is whilst the device is powered off and cold to avoid injury).
- Turn the socket on.
- Then touch the outer area of your burner to turn on.
- Enjoy your scent.
The light will then come on and begin heating up and melting the wax on the plate above, touch again to increase the brightness and heat of the lamp and touch one last time to turn the burner off, you can also use the isolation switch located on the wire between the burner and the plug.
Just turn the burner off to allow it to cool down when not in use, please allow the burner to cool down fully before attempting to touch or clean it.
All burners come boxed with everything you need including hot plate, bulb, burner and instructions, please ensure you read and retain the instructions for your product, check out our safety section for general tips!
Burners are large items and may be subject to additional shipping costs, free shipping offers exclude burners, see terms and conditions for more information.